2/2 PLUNGER VALVE WAY DIRECT – ACTING TYPE 2610

PLUNGER VALVE WAY DIRECT – ACTING TYPE 2610

Type Description 2610: Van điện từ hơi kiểu 2610

The direct-acting valve Type 2610 is delivered with circuit function normally closed. The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a “kick and drop” electronic that supports the opening phase and afterwards reduction of the opening holding power.

Direct-acting, media separated valve with diameter of up to DN 12
Welded metal bellows system (316Ti)
High-quality PTFE seat seal
Media temperature from -200 °C to +180 °C
Energy-saving ‘Kick and Drop’ electronics

Tài liệu tham khảo: PLUNGER VALVE WAY DIRECT – ACTING TYPE 2610

Các dòng liên quan:

VAN ĐIỆN TỪ HƠI KIỂU 0255

Push-over solenoid system
Compact design, up to DN 6
Housing made of brass or stainless steel with threaded connection

VAN ĐIỆN TỪ HƠI KIỂU 0355

3/2-way seat valve direct-acting
Push-over coil system
Medium temperature up to +180°C
for liquid and gaseous media

DIRECT – ACTING WAY PLUNGER VALVE 6027

Direct-acting, powerful valve with diameter of up to DN13
Vibration-proof, bolted coil system
Increased leak-tightness with welded plunger guide tube
Explosion proof versions
High pressure variants for gases and liquids

3/2 DIRECT – ACTING WAY PIVOTED ARMATURE TYPE 0330

Direct-acting, media separated valve with diameter of up to DN 5
Maintenance-free pivoted armature technology
Vibration-proof, block screwed coil system
Suitable for aggressive alkaline and acidic solutions
Service-friendly, robust manual operation

Các sản phẩm liên quan: van điện từ solenoid 3/2, van điện từ burkert, vạn điện từ hơi, van điện từ công nghiệp, van điện từ nước, van điện từ khí, van điện từ hơi nóng

Sản phẩm cùng loại:

DIAPHDRAGM VALVE 2/2 WAY SERVO – ASSISTED TYPE 0280 VAN ĐIỆN TỪ BURKERT 2/2 CÓ LỚP MÀNG 0280 Type Description 0280: Van điện từ 2/2 loại 0280 Type 280 is a normally closed or normally open servo-assisted solenoid valve (circuit functions A and B). For circuit function A, the valve is normally closed by spring…
3/2 PISTON VALVE WAY SERVO – ASSISTED TYPE 6430 PISTON VALVE WAY SERVO – ASSISTED TYPE 6430 Type Description 6014: Van điện từ sử dụng vị trí nguy hiểm 6430 The valve 6430 is a servo-assisted 3/2-way piston valve. If the valve is not supplied with auxiliary pilot air, a minimum differential pressure is required…
2/2 PLUNGER VALVE WAY DIRECT – ACTING TYPE 6014 PLUNGER VALVE WAY DIRECT – ACTING TYPE 6014 Type Description 6014: Van điện từ sử dụng vị trí nguy hiểm 6014 Valve 6014 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material…
2/2 PLUNGER VALVE WAY DIRECT – ACTING TYPE 6013 PLUNGER VALVE WAY DIRECT – ACTING TYPE 6013 Type Description 6013: Van điện từ sử dụng vị trí nguy hiểm 6013 Valve 6013 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material…
2/2 SERVO – ASSISTED WAY PISTON VALVE TYPE 6407 SERVO – ASSISTED WAY PISTON VALVE 6407 Type Description 6407: Van điện từ hơi kiểu 6407 The Type 6407 valve is a servo-assisted piston valve. The fix coupling between pilot valve and piston provides an opening of the valve without pressure difference. As a piston valve,…
2/2 SERVO – ASSISTED WAY PISTON VALVE TYPE 6240 SERVO – ASSISTED WAY PISTON VALVE 6240 Type Description 6240: Van điện từ hơi kiểu 6240 The 6240 valve is a servo-assisted piston valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending…
2/2 DIRECT – ACTING WAY PLUNGER VALVE TYPE 6027 DIRECT – ACTING WAY PLUNGER VALVE 6027 Type Description 6027: Van điện từ hơi kiểu 6027 Valve 6027 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on…
2/2 SERVO – ASSISTED WAY PISTON VALVE TYPE 5404 SERVO – ASSISTED WAY PISTON VALVE TYPE 5404 Type Description 5404: Van điện từ hơi kiểu 5404 The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are…
3/2 DIRECT – ACTING WAY PLUNGER VALVE TYPE 0355 DIRECT – ACTING WAY PLUNGER VALVE TYPE 0355 Type Description 0355: Van điện từ hơi kiểu 0355 Direct-acting plunger solenoid valve Type 0355 for controlling hot media such as steams, oils and gases 3/2-way seat valve direct-acting Push-over coil system Medium temperature up to +180°C for…
2/2 DIRECT – ACTING WAY PLUNGER VALVE TYPE 0255 DIRECT – ACTING WAY PLUNGER VALVE TYPE 0255 Type Description 0255: Van điện từ hơi kiểu 0255 The direct-acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures. Push-over solenoid system Compact design, up to DN 6 Housing made of brass…
2/2 SERVO – ASSISTED WAY DIAPHRAGM TYPE 6281 VAN ĐIỆN TỪ BURKERT 2/2 DÙNG SERVO CÓ MÀNG NGĂN KIỂU 6281 Type Description 6281 The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm material combinations and methods of…
2/2 SERVO – ASSISTED WAY DIAPHRAGM TYPE 6213 SERVO – ASSISTED WAY DIAPHRAGM TYPE 6213 Type Description 6213 The 6213 EV valve is a servo-assisted solenoid valve of the S.EV series. The spring coupling of the diaphragm supports the opening process of the valve. In its standard version, the valve is suitable for use in…