ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 30-B4

ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 30-B4

ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 30-B4

Giới thiệu: ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 1″

Công ty IWISU là một trong những Công ty hàng đầu ở Việt Nam về phân phối Van các loại với các thương hiệu nổi tiếng trên thế giới như: ANIX, JC VALVE, SAMWOO, BONNEY FORGE, ARMSTRONG, SWISS FLUID, JDV CONTROL VALVE, MARIANI, KITZ, EBRO VALVE,…

Trong đó sản phẩm ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 1″ được công ty nhập khẩu và phân phối tại Việt Nam.

Chất lượng của van ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 1″ không chỉ đáp ứng nhu cầu của Khách hàng mà còn mang lại sự tin tưởng, uy tín về sản phẩm. Do đó đảm bảo sự ổn định trong sử dụng.

Hiện nay, sản phẩm ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 1″ đang được Công ty IWISU phân phối tại Việt Nam với nhiều mẫu mã, chất liệu, kết nối,…với đội ngũ kinh doanh, kỹ thuật chuyên nghiệp sẽ mang đến sự hài lòng của quý khách khi lựa chọn sản phẩm tại IWISU.

Thông tin sản phẩm: ARMSTRONG FLOAT & THERMOSTATIC STEAM TRAP 1″ 

  • Model: 30-B4
  • Condition: New
  • Body and cap: ASTM A48 Class 30
  • Internals: All stainless steel—304
  • Valve: Stainless steel—303 or 440
  • Seat:
    • Stainless steel—303 (ASTM A582)
    • Stainless steel—440F in 1-1/2” and 2”
    • Stainless steel and bronze with phosphor bronze bellows, caged in stainless steel

15-B8 Armstrong Float & Thermostatic Steam Trap 2″ 15 PSI B.

Download: Armstrong B and BI series steam trap submittal

Specification: Float and thermostatic steam trap, type … in cast iron, with thermostatic air vent.

Armstrong B and BI series steam trap submittal

Armstrong B and BI series steam trap submittal

Description:

Armstrong B and BI Series F&T traps combine high standards of performance and long life with economy for heating service where continuous drainage with high air-venting capacity is required.

Because of the wide use of vacuum returns in systems of this type, the thermostatic air vent element is charged to give it the capability of compensated response to the pressure-temperature curve of steam at any pressure from less than 20” (500 mm) Hg vacuum to 30 psig (2 bar) gauge. B and BI Series F&T traps will vent air at slightly below steam temperature throughout this entire range of operation.

All B Series traps, except the 1/2” (15 mm) and 3/4” (20 mm), have inlet connections on both sides of the body to provide flexibility in piping. The BI Series F&T traps in sizes 1/2”, 3/4” and 1” feature the convenience of in-line connections with the same internals as the B Series.

Sản phẩm cùng loại: