VAN ĐIỆN TỪ NICHIDEN MV10

MV10 NICHIDEN SOLENOID VALVES FOR AMMONIA

VAN ĐIỆN TỪ NICHIDEN MV10

VAN ĐIỆN TỪ NICHIDEN MV10

Tổng quan:

Hiện nay, công ty IWISU đang cung cấp các loại van điện từ Nichiden xuất xứ từ Nhật Bản. Nichiden được biết đến từ các sản phẩm thiết bị van điện từ như: van điện từ, van tay, thiết bị cầm tay và thiết bị đo, thiết bị tự động hóa, thiết bị nhà xưởng,….., Qua đó công ty IWISU là nhà cung cấp và phân phối sản phẩm Nichiden tại Việt Nam: MV10 van điện từ Nichiden

Các van điện từ Nichiden được thiết kế cho chất lỏng làm lạnh, thiết bị làm lạnh nhỏ hoặc điều hòa không khí nhỏ đến thiết bị có kích thước lớn hoặc cho các dòng khí, van điện từ Nichiden được phân thành nhiều dòng khác nhau như: SX20PG cho phép dòng chảy ngược, sê-ri SR60 là mô hình đảo ngược (dòng chảy tự do). SR10DC, SX21PC và SX54C có thiết kế độc đáo của loại thường mở và chúng thể hiện hoạt động ổn định. Sê-ri NS-3JE, NS-3JD-A, SX39SR10DH, SX18PA được sử dụng để kiểm soát áp suất thủy lực hoặc áp suất khí của bộ nạp trong tủ lạnh nhiều xi-lanh và chúng được thiết kế nhỏ gọn.

Van điện từ Nichiden có kích thước nhỏ và lớn là sản phẩm có độ tin cậy cao dựa trên kinh nghiệm và công nghệ của công ty IWISU trong nhiều năm qua trong lĩnh vực này.

Các van Nichiden đang sử dụng đồng thau hoặc inox cho thân chính hoặc bên trong van. 

Thông tin sản phẩm: MV10 NICHIDEN SOLENOID VALVES FOR AMMONIA

Rating Voltage

[AC V

Power Consumption

[W

Apparent Power

[VA

50Hz/60Hz 50Hz/60Hz
100
11/10

30
200

 

Pipe Size Orifice Size

[mm

Flow Factor

[Cv

Oper.Press.Diff.

[MPa

Max. System Pressure

[MPa

10A(Rc3/8) 3.0 0.3 0~3.0 3.0

Overview: MV10 NICHIDEN SOLENOID VALVES AMMONIA

Currently, IWISU company is supplying all kinds of solenoid valves from Nichiden originating from Japan. Nichiden is known from solenoid valve products such as solenoid valve, hand valve, handheld device and measuring device, automation equipment, factory equipment, …, Through that company IWISU is a supplier and distributor of Nichiden products in Vietnam MV10

Nichiden solenoid valves are designed for cooling liquids, small chillers or small air conditioners to large sized equipment or for gas streams, Nichiden solenoid valves are divided into different lines such as : SX20PG allows reverse flow, SR60 series is a reverse model (free flow). The SR10DC, SX21PC and SR10DH have a unique design of the type that is normally open and they show stable operation. The NS-3JE, NS-3JD-A, SX39 and SR10DH series are used to control the hydraulic pressure or air pressure of the loader in a multi-cylinder refrigerator and they are compactly designed.

The solenoid valve MV10 has the function of a check valve at the same time, the valve will be closed regardless of the pressure difference in any direction unless it receives a signal to open.

If the same purpose is achieved by a conventional two-way valve, the two solenoid valves must be placed in series with each other.

MV10 NICHIDEN SOLENOID VALVES AMMONIA are small and large in size and are highly reliable products based on the experience and technology of IWISU company for many years in this field.

MV10 NICHIDEN SOLENOID VALVES AMMONIA are using brass or stainless steel for the main body or inside the valve. Pay special attention to thermal resistance. And because high molecular materials are used as disc materials, Nichiden solenoid valves can be used in a hot air stream to control defrosting.

Sản phẩm cùng loại: